Giantex End Table W/ 2 Drawers and Shelf Space-Saving Rectangular Bedside Table with Metal Handle, Retro Side Table for Living Room Bedroom Home Furniture Side Table (1, Brown)

About this item

♡ ♡Large Storage Space ▷ Our end table provides abundant storage space with 2 deep drawers and 2 tiers shelves. You can store small gadgets or accessories like remote control in the drawers. The lamp, photo frame or flower vase can be placed on the top tier. Magazines or books can be placed on the second tier. This end table greatly increases the use of space especially for small units or apartments.
♡ ♡Considerate Compact Design ▷ Because of the slim and rectangular shape, this wooden nightstand is specially designed for compact spaces like the sofa side and bedside. The end table can make use of full space without taking up too much of it. Our bedside table is perfect for your living room, bedroom and study.
♡ ♡Exquisite Workmanship ▷ Made of high-quality P2 level particle board, our nightstand is sturdy which has a long service life. The surface is smooth and durable which is good enough to protect from scratches by sharp objects. Because of the free-standing construction, our end table is stable enough to be placed in anywhere without additional support.
♡ ♡Aesthetic Appearance ▷ The latest minimalist design and retro metal-plated handles form a harmonious combination of modern and classic. The easy-slide rails give you a smooth experience while handling the drawers. This side table can not only blend with your rooms and décor but add a sense of elegance to your bedroom and living room as well.
♡ ♡Easy to Assemble and Clean ▷ Simple-structured piece comes with all necessary parts makes it easy to set up by following the detailed instructions we provided. The smooth surface allows you to clean the table with a damp or dry cloth. The maintenance of the table is very comfortable in normal times.

• Brianna

  I was a bit worried based on other reviews that these would be difficult to build but my husband and I built both in 2 hours. We only used hand tools so that we wouldn’t split the wood. The only part where we thought the holes didn’t line up were the bottoms of the 4 drawers when we were putting on the tracks. Turns out we just had them the wrong way and they were very easy to turn around so that the holes lined up. This is not shown in the instructions, however, so you just have to make sure you have it the right way.One of the tables had 2 little marks but they are in the back so we don’t mind. Also one of the drawers does not close completely flush but it still slides well and you cannot really tell unless you’re looking at it very closely.We are really happy with these tables and they fit perfectly in the narrow space that we needed them to fit in!

• Gerald Norris Jr.

  We have been using odds and ends to act as end tables since moving into our new house. I liked the look of these and for the price they seemed like an affordable storage solution that actually looks nice.First, I knew, for the price, that what we were going to be getting was assemble-your-own, mostly manufactured wood product. The pair arrived this morning, and with a little organization and some patience, my wife and I were able to get the units assembled in less than 2 hours.The units we got were in good shape, and all the holes matched. The instruction set provides explicit pictures for assembly, though for older eyes, some of the images are smaller than I’d like, but for smaller detail areas they provided larger insets to give a good picture of orientation and the steps were easy to follow. With woodworking as a hobby, I knew not to try to tighten the screws too tight to prevent stripping.What we ended up with is a nice set of tables that will serve the purpose for some time until I can build something similar. Are they plastic and particle board or MDF? Yes. Do I expect them to be able to support a large amount of weight? No. Do they look good sitting beside our chairs? Yes. These aren’t heirloom pieces, but reasonably priced products that do the job.Tips. Go through the instructions and understand the steps. Sort out the parts; it will make your job easier. All of the screws can be started/tightened by hand, but a drill with a Phillips head bit will help save some hand cramping as long as you simply start the screw to where it’s nearly tight, and finish tightening by hand. Do not over-tighten screws. Particle board and MDF do not have the tensile strength that real wood has, so it is easy to strip the screw hole if too much force is applied. Take your time and go through each step, and try to think of it as building a model or a 3D puzzle. You’ll end up with a pair of serviceable little tables that will last for several years.

• mkg

  This table is very nice for the price. Is it perfect, No. The drawers on my table don't line up evenly, the picture instructions are a little hard to follow, and the white tabs that are suppose to be installed on the outside of the back are, in my opinion, are unnecessary and ugly.But, overall I think it is a very nice table.

• Blondie

  Very cute & sturdy table. The instructions aren't very clear. Toward the end, when it was time to put the drawer bottom and slide rails on, the predrilled holes did not line up. Thankfully it was not a problem to create my own. Handle little table for small spaces when you need the surface.

• AngieM

  Wood was solid, all pilot holes lined up, assembly was easier than I had feared.Only downside was drawer rails were grouped and not individually labeled, required figuring out which of the four pieces corresponded to which part number on instructions.Otherwise very happy with thus purchase.

• Amazon Customer

  This item was a waste of my dollars and my time! Factory drilled holes didn't match provided hardware and locations, drawer slides were improperly drilled and the "sawdust/glue boards" were soft and certainly not sturdy. Two parts broke prior to snugging up the screws!!! The diagrams/directions were very, very poor.I have put together many pieces of furniture in the past and never had this much difficulty with part breakage and missdrilled pieces. Summation: I wouldn't recommend this product to anyone!!

• Ted Triche

  This was a gift for my wife and she loves it. It was a well designed product with Europoean type fasteners and screws that was fooll proof. Packming of this product was most effective whith no damage at all.

• A. V. Giammatteo

  The quality is good for the price. First thing this is not made of solid wood which I expected. A few of the screws stripped out instead of tightening. But overall they are worth the money I paid for them.

• CA Business Owner

  These are a perfect fit for what we needed next to the couch. They are just the right height and length. I'm pretty mechanically inclined and I've recently gotten some furniture from IKEA. So part of my irk may be that I'm unfairly comparing. The instructions could have the images blown up a bit bigger so we could not struggle to see the details. The round things that screw around the head of another screw top don't quite tighten right, but once the whole thing is assembled, it's quite sturdy. It bugs me that the drawers aren't well aligned (visually or mechanically)... but for the price... I cannot complain. It's truly a great value and a cute little stand. I got a giggle... we recently assembled a filing cabinet that had similar instructions with little bags separated with the hardware. The filing cabinet had a bag called "Spare Parts". They threw in a few extra screws and dowels for measure... which is brilliant! But if you've worked on cars much, you know that having "extra" is NOT a good thing and it took some searching to see what I missed. I don't think I missed anything, but I wish they'd have labeled that they threw in some extra. Also, the last step, the little plastic triangles... I didn't have holes to screw those into. It wasn't difficult and it worked fine, but it was unnerving trying to figure out if I just "pick a spot". Other reviews said that the instructions suck. They do! But it's still a great little stand and at a great price.

• Thomas G.

  The living room at my cabin is only 12x16. So, in order to get enough comfortable seating, I needed narrow end table for drinks and storage. This table works perfectly and looks great. Yes, its particle board (not solid wood), but at this price what do you expect. They shorted me two (labeled J) screws and two of the cam nuts (labeled B) broke. Just so you know with the (labeled C & T) wood dowels, I used a little Elmers wood glue to ensure the table would be solid. The directions were nothing but pictures. This worked well, but a little written instructions would certainly help. I guess pictures are better than instructions written by someone who doesn't speak English. I took one star off for missing screws. Like I said I the beginning, I will be buying at least one more for the cabin and my wife liked the looks so much she wants one for our home as well. Worth the money.